• Designed to handle 55-gallon steel, plastic, and fiber closed head drums with a top lip
• Automatic secure and release eccentric lock makes this drum handler a real time saver
• Includes adjustable positioning feature for increased adaptability
• Requires assistance from an overhead lifting device
• Not for use with open head drums

• Designed for drum lifting and transporting with an overhead lifting device
• Constructed of  grade 80 chain for OSHA & ANSI compliance
• Easy to use design
• Drum clamps include spring-loaded latch for positive drum grip
• For use with closed head steel, plastic, and fiber 30 and 55-gallon drums with a top lip

• The Crane/Hoist Drum Lifter has an automatic mechanical operation
• Great for positioning drums in and out of overpacks
• Steel construction with spring loaded arms for safety
• Accomodates steel, plastic, or fiber drums
• Overall dimensions are 16" W x 9 1/2" L x 21 1/2" D
• Drums weighing over 500 pounds must have top lid secured before lifting

- Opens any size and gauge steel drum quickly, and easily, allowing drum recycling without the risk of fire from a cutting torch

- Sharp-edged hardened steel replaceable blade

- Comfortable plastic hand grip

Non-Sparking Deheader

- 100% non-sparking deheader - Patent # 399.718

- Sharp-edged hardened non ferrous alloy replaceable blade

- Comfortable plastic hand grip

Lift and Dump Hydraulic Drum Dumper

-Dumps drums weighing up to 1,500 lbs.
- Works with 30 and 55 gallon drums
- All steel construction including chute chute
- Portable units have two rigid and two swivel casters with floor locks

- Standard features include:
   - 56" frame
   - 3/4 HP motor
   - 120v single phase / 60HZ with an 8 foot  long power cord and plug
   - Upper travel limit switch
   - Emergency brass safety velocity fuse in cylinders
   - Vertical adjustment drum restraints

- Dumps drums at variable heights and angles through the additon of an second cylinder (vs. a similar manual drum dumper)

Capacity:
-750 / 1,000 / 2,000 lbs.

Dump Heights:
-36", 48", 60"

Platform Size:
-24" x 24"

Safety:
-Velocity fuse (in case of hose failure it will stop unit from coming down)
-Down flow control built into power pack
-Heavy duty floor lock

Power:
-A/C 110 volt 1/60

Features:
-Semi-Circular back plate (24" diameter)
-8" dia. x 2" wide casters
-Covered power pack
-Adjustable retaining bar

Options: (Call for Pricing)
-Increase/Decrease backplate, dump height, tilt angle
-Chute attachments, fixed retaining bars, stainless steel, limit switches

- The multifunctional unit, model DRUM-LRT, features a hand pump to lift drums from ground level to a raised height of 68" to bottom of drum in horizontal position
- For use with 55-gallon steel, plastic, and fiber drums.
- A hand crank gear mechanism provides the controlled 360° rotation of the drum
- A floor lock is standard to stabilize the unit in a fixed position

Model DRUM-LRT-DC has a 12v DC battery powered lift operation and a hand crank gear mechanism rotation (on-board charger standard). Minor assembly is required.

-  Model FDT-22 can be used to lift both 30 and 55-gallon steel drums with either an overhead chain or hoist
-  This unique lifting system holds drums securely with a locking safety handle
-  Steel construction with powder coat finish

-  Model DL-31 may be used to lift 30 and 55-gallon steel drums with either an overhead chain or fork truck
-  Hook opening measures 4" W x 2" H
-  Steel construction with powder coat finish

• Heavy-duty cast iron construction
• Opens most plugs and bung nuts, male & female, steel & plastic
• Iron alloy will not chip or bend in normal use
• Protects knuckles

• Model WES-272016 is made of  Bronze alloy which is stronger than aluminum!
• Model WES-272178 has a built-in 1.25" wrench for tightening faucets into drums
• Offset handle design reduces user stress and minimizes knuckle injury

• Allow fork truck driver to rotate standing drums to the horizontal racking position and vice-versa
• Positive latching system ensures safe handling of drums weighing up to 800 lbs.
• Slide the positioner extensions over the vertical drum
• With the aid of the Drum Positioner, rotate drum to horizontal position
• Latching system will engage to allow horizontal positioning of drum and it's ready to slide into the rack!
• Mechanical operation relies on fork truck to rotate and lift drums
• Fork pockets measure 6 1/2" wide x 2 1/2" high usable on 19 1/2" centers

NOTE: Spacers for use on drums with drum faucets installed are priced by the pair

• Lift drums in the horizontal position and easily with these Drum Slings
• Handle open or closed head steel drums
• The large steel lifting ring accomodates most overhead lifting systems
• Choose from brass, iron, or galvanized iron construction
• Accepts 30 and 55-gallon steel drums

• Drum Stands  provide economical and convenient portability
• These stands offer a uniquely designed under structure that allows for transporting of drums with either a pallet truck or fork truck
• Fork lock tabs minimize the possibility of the drum stands accidentally tipping while being transported with a fork truck
• Accepts steel, plastic and fiber drums
• The Drum Stand also allows for single drum stacking for easy storage of drums up to three high (empty stands are nestable and stackable)
• All welded steel construction
• Stands include a safety yellow powder coat finish

• Increase storage space by stacking your drums with our Drum Tier
• The economical Drum Tier is designed to maximize floor space in a safe and convenient manner
• The lightweight design utilizes one person operation
• Handles steel drums up to five units high
• Tabs keep drums aligned when stacked

• Automatically relieves pressure at 5 PSI
• Maximum flow of 220 CFM at 20 PSI
• Flame arrestor prevents sparks and flames from ingiting drum contents
• fits 2" bung hole in steel and plastic drums
• Part 272030 for drums in horizontal (pouring) position
• Manual vacuum relief by lifting and rotating valve stem
• FM Approved

• Easy-to-use self-closing design
• .75" NPT connection
• Teflor® gasket

• Part  272037 has an adjustable shank designed to easily adjust to proper drain position after installing in drum. Includes internal flame arrestor
• Part 272081 has a rigid shank design. External flame arrestor
• Both models are FM approved for use with oils (under 30 SAE) and non-corrosive flammables.

• Adjustable  shank designed to easily adjust to proper drain position after installing in drum
• .75" NPT connection
• Teflon® gasket
• Part #272038 has an internal flame arrestor
• FM approved for use with oils (under 30 SAE) and nonflammables, compatible with stainless steel

• Zinc die cast alloy
• Easy -to-use self-closing design
• Can be padlocked in closed position
• .75" NPT connection
• Viton gasket
• Part 272083 sold with flame arrestor
• Part 272080 sold with no flame arrestor
• Both models  are FM approved for non-viscous liquids

• Fast, self-closing Teflon® blade
• 2" NPT connection
• FM approved for use with viscous non-corrosive fluids heavier than SAE 30

• Economical way to gauge drum contents
• Heavy gauge glass and plated steel construction
• Accepts standard .75" NPT faucet
• Buna-N seals; .75" NPT connection, 22" height (with supplied fitting)
• Note: Gauge 272080 and 272083 are Zinc Die Cast Faucets

• Rotate and position a fully loaded 55-Gallon steel drum with ease
• Best when used with an overhead hoist
• Features a chain crank that allows the operator to rotate 360° drums that are out of reach
• Drums are held in place with a drum locking system
• Drum must be full to rotate at rated capacity

• Dispense or store 55-gallon steel drums with this non-flammable heavy-duty Horizontal Steel Retention Basin
• This unit is constructed of steel to resist extreme heat environments
• The rugged steel construction provides durability and repairability
• Portability is made easy with the built-in fork pockets
• The built-in horizontal drum cradles are sloped
• Volume capability is 66 gallons
• Meets RCRA and Uniform Fire Code (UFC 8003 1.3.4)
• Meets EPA 40 CPR - 264.175 Code

• Crushes 55-gallon steel drums to approximately 6" high and resets automatically to crush another drum in just 25 seconds
• 38,000 pounds of crushing power
• Drum compacting feature allows you compact contents inside the drum by simply removing the drum crushing platen
• Crushing feature will only work with 55-gallon drums
• Convenient design provides you two pieces of equipment in one
• Safety features include a pressure release valve, which prevents overload, and a door interlock system that will prevent the motor from running unless the door is closed
• 6.5 hp motor is 208-230/460v, 3-phase, 60 hz.
• Meet OSHA and JIC standards
• Built-in fork pockets aid in transporting
• Aluminum Drip Pan, model HDC-DPN, is available for catching excess liquids expelled during the crushing operation
• The pan holds 7 1/2 gallons and measures 30" wide x 20" deep x 3" high

• Perfect for positioning 55-Gallon steel, plastic, and fiber drums horizontally on shelves
• Solid steel construction provides stability during transit
• Drums are held in place with a ratchet mechanism
• Drums may easily rotate 360° with rotation method
• Unit rolls easily on (2) 8" x 2" phenolic casters and (2) 5" x 2" swivel polyurethane casters
• Comes standard with hydraulic foot pump
• Optional power units available to ease lifting operation

• Efficient, economical way to handle 55-gallon steel drums
• Sturdy handle provides leverage for heavy lifting and easily locks drum in position 5" or 11" off the floor
• Drum rotates 360°
• Rolls smoothly on 8" front wheels and a 4" rear swivel caster
• Not for use with drums on pallets

• Manual Drum Upender provides the leverage needed for tilting horizontal drums to the vertical position
• Constructed of solid steel for long life
• Wide toeplate prevents denting on barrel sides
• Narrow toe plate grabs a variety of chimes
• Powder coat finish
• Steel construction

• Simple three-arm design for use with closed head 30 and 55-gallon steel, plastic, and fiber drums with a top lid
• Each removable arm also functions as a wrench for use on drum plugs, faucets, and rim ring bolts
• Mechanical operation
• Requires assistance from an overhead lifting device
• Durable powder coat finish
• Steel construction

• This product is designed for the transporation of 55-gallon closed head steel drums with an overhead lifting device
• Adjustable attachment point allows drum to be lifted from a horizontal to a near-vertical position
• Easily attaches to any drum with both a top and bottom lip
• Adjustable top attachment point for use with different height drums
• Steel construction
• Powder coat blue finish

• Transport containment units with Overhead Drum Dollies, series DRUM-SP
• Designed to hold drum spiill containers
• These dollies roll smoothly on four swivel casters
• Steel construction
• Powder coat finish

The Containment Units, series SCC, are specially designed to contain leaks and spills from 55-gallon drums during plant transport and storage. Either a fork truck or Overpack Drum Dolly can be used to transport the containment units.

Model DRUM-4848 is constructed from 100% polyethylene. Move drums from workstation to workstation with a fork truck or pallet truck. Holds (4) 55-gallon drums. Features: 4-way entry, reversible and holes for drainage.

Low Profile Spill Decks are designed to catch spills. Model VLPDP-2448 has a volume capacity of 9-gallons, while model BLPDP-4848 has an 18-gallon volume capacity. Manufactured from chemical resistant polyethylene. Removable decking standard.

Drum Spill Pallets, series DR,  industrial strength molded polyethylene pallets with unique patented grid patten drainage deck capture container spills and leaks of expensive materials for reuse. Unique design minimizes sloshing when transporting. Excellent for collecting most hazardous products. Dozens of applications when coordinated with many other containment products.

Drum Containment Units, series SCC, are specially designed to contain leaks and spills from 55-gallon drums during plant transport and storage. Either a fork truck or Overpack Drum Dolly can be used to transport the containment units.

NOTE: Series SCC is shown in the photo with the DRUM-SP Dolly. Please note that this dolly is sold separately. Please see Overpack Drum Dollies and Containers for description and pricing information on the DRUM-SP Dolly.

• Dispense drum contents into smaller containers and avoid messy clean-ups with our Poly Drum Cradles
• The horizontal drum cradle collection system captures all spills and leaks and stores them in the interior of the hollow cradle for reuse or safe, clean disposal
• 2" NPT drain plug is standard
• Fork entry measures 6" x 3"
• Made from 100% virgin polyethylene

Model VCRD-P  features retractable handles for tilting and positioning drums. Includes a round contoured lower back for easier rotation of drums from horizontal to vertical position and 6" x 2" polyolefin wheels

• Steel racks with two-way fork access
• Not recommended for stacking more than two racks high
• All steel construction with 1 / 4" formed steel cradles
• Bolt together assembly with hardware included
• Works well with Hydraulic Drum Stacker and the Drum Positioner

• Most spills occur when transporting chemicals
• Safely and securely move your chemicals with our Transport Pallets
• Welded all steel construction with a durable finish
• Galvanized grating is easily removable for sump cleanup
• 66-gallon sump capacity
• Each unit is  tested for leaks using a low viscous die penetration process

• Transfer 55-gallon steel drums from area to area and then safely dispense the drums with this nonflammable Retention Basin Cart
• Constructed of steel to resist extreme heat
• Portability is made easy with the 2 locking swivel and 2 fixed polyurethane casters
• A push handle is located at one end for easy maneuverability
• Removable steel grating is standard
• Volume capacity is 66 gallons
• Meets RCRA and Uniform Fire Code (UFC 8003)
• Model SRBC-HR-2 features a stand which measures 24" W x 14" L x 14" H

NOTE: Meets EPA 40 CPR - 264.175 & UFC 8003.1.3.4 Standards

• Transport up to 800 pounds with your fork truck and the Tilting Drum Ring
• Pivoting fork pockets allow you to manually rotate drum to dispense light materials
• To use, slip the band over the drum and tighten the lock to secure the band around the belly of the drum
• Steel construction
• Powder coat finish

NOTE: Capacity is based on full drums. Half-full drums are rated at 600 lbs.